Home

How to Replace Your Homes Gas Water Heater – Family Issues


 

You must replace the unit by purchasing a new model to avoid the discomfort of frigid showers as well as other problems.

Check your tank to find out important details such as its capacity and power requirements. After that, verify the ventilation in your house. Then, you should check the home’s water pressure using a water gauge installed on an outdoor faucet, and look for the optimal PSI between fifty and sixty. It is possible to put in an automatic pressure reduction device in the event that your reading goes over eighty.

Now it’s time to remove your previous unit. It is essential to turn off the gas before you begin. Next, utilize an instrument to remove this gas pipeline from the valve for control and disconnect the venting. Drain the tank in either a bucket or. A hot shower in your home will help accelerate the process. Once you have finished, remove the tank and clean it up.

If you are using a new device you can set up an empty drain pan in order to prevent any water flooding. The drain pipe should be connected to the new unit, and connect the lines for water. The tank should be filled with water and then reconnect the gas lines. dfno2d9chn.

Leave a Reply

Your email address will not be published. Required fields are marked *